Sign in
NTRIP caster · RTK corrections

Put your GNSS base online. Your whole crew gets RTK.

Point your base station at our NTRIP caster and every rover and controller on your account receives its corrections over the internet, with no radio range to worry about. Sign up and you get a mountpoint and a rover login right away.

Caster addresscaster.avcastertools.com : 2101
A base station sends RTK corrections through the caster to a drone, a surveyor, a SLAM laser scanner, a layout robot, a dozer, a grader, a tractor, a combine and an autonomous vehicle basecaster autonomous vehicletractorcombinedozergradersurveyorSLAM scannerdronelayout robot
Who it's for

One base, every kind of rover

Surveying and scanning

GNSS rovers and data collectors for topo, stakeout and as-builts, and SLAM laser scanners that tie each scan to real coordinates.

Layout robots

Small robots that mark points and lines on site straight from the design file.

Machine control

Dozers and graders with GNSS machine control that cut and fill to the design grade.

Agriculture

Auto-steer and guidance for tractors and combines, from any receiver that accepts NTRIP corrections.

Drones

RTK drones for mapping and inspection, corrected through the controller's internet connection.

Autonomous vehicles

Robots, autonomous vehicles and machine control that need centimetre-level positions.

How it works

Three steps to corrections

1

Create your account

You get a mountpoint for your base and a rover login straight away.

2

Connect your base

In your receiver's NTRIP server settings, enter our address, port 2101, your mountpoint and its password. NTRIP v1 and v2 both work.

3

Connect your rovers

Any NTRIP client works: the same address, your rover login and your mountpoint. Each plan sets how many rovers can connect at once.

What you get

More than a relay: see what your base is doing

Live map

Your bases and rovers on a map, with each rover's distance to its base. Baselines over 30 km are flagged.

Base analyzer

Device info, satellites and signals per constellation, a live sky plot, and a 24-hour sky visibility map that points out obstructions.

Jamming and spoofing alerts

Each base is checked against its own normal behaviour. If jamming or spoofing is suspected, you get an e-mail.

Space weather

Live NOAA data on geomagnetic storms and solar flares, explained in terms of what it means for RTK work.

Base-down alerts

An e-mail when your base stops broadcasting, and another once it has been back for 5 minutes. A connection that keeps dropping sends one alert, not dozens.

Your language

The portal and every e-mail in English, Spanish or French.

Your bases, your names

Give each base a name your crew recognises. Need a new mountpoint code? Change it yourself: the old code keeps working for 30 days while you update your equipment.

Logins at a glance

Show your rover password whenever a controller needs it, copy it with one click, or reset it. Passwords are stored encrypted.

Partner stations

Stations shared in your country come with your rover login; plans that include partner networks add theirs too.

Coordinates checked every day

Each day your base's data is sent to NRCan's CSRS-PPP service and the result is compared with its verified coordinates. A new base gets its coordinates automatically; a base that moved earns you an e-mail, nothing changes behind your back.

Your country's official datum

Rovers work directly in NAD83(CSRS) in Canada or MAGNA-SIRGAS (ITRF2014, epoch 2018.0) in Colombia: base coordinates are converted the way NRCan and IGAC define it, with the SIRGAS velocity model where needed.

Old and new rovers

Bases that send the older RTCM 3 messages (1004/1012) are understood too: their corrections go out as MSM for modern rovers, or unchanged for older ones, and they can be stations of a VRS network.

Clean satellites only

Each base sends only satellites above 10° (set per base), so rovers don't waste time on low, noisy signals. The base analyzer shows the mask on its sky plot.

Live satellite orbits

Orbits arrive live from the IGS network, so the sky plot, the elevation mask and network RTK keep working even when a download server is down.

Bases shared for a job

Need a base near a job site? We can add it to your rover login until a date you choose. It appears in your portal with its analyzer and sky plot.

Network RTK (VRS)

A virtual base a few metres from every rover

With a single base, accuracy fades with distance: the ionosphere and troposphere are not the same 30 or 50 km away. Our VRS network combines several reference stations. It resolves their carrier-phase ambiguities, measures those errors across the region, and builds a virtual base right next to each rover from the position the rover sends.

  • One mountpoint for the whole region. Your rover sends its position (NMEA GGA) and receives standard RTCM 3 MSM corrections, like from any base (or the older 1004/1012 messages for rovers that need them).
  • Fixes far from any station. GPS, Galileo and BeiDou with every integer ambiguity checked around the network before it is used, GLONASS on top, and the stations' antennas corrected with the IGS calibrations.
  • Never without corrections. While the network warms up, or if a station drops out, your rover gets the nearest station automatically.
  • Have several bases? We can join them into a VRS network for your crews. Ask us

Available on plans with VRS access, in areas where a network is running.

Three reference stations around a rover; the caster builds a virtual base next to the rover from their measurements CORSCORSCORS rovervirtual base

Tested on public CORS data

Nearest stationBase used by the roverFixedHorizontalVertical
30 kmVirtual base (VRS)95%1.0 cm1.65 cm
30 kmThat station alone70%3.4 cm5.1 cm
54 kmVirtual base (VRS)87%1.3 cm5.0 cm
54 kmThat station alone17%4.5 cm15.3 cm

NOAA CORS stations in North Carolina, 28 September 2026, 15:00 to 19:00 UTC (afternoon ionosphere), 1-second GPS and Galileo data. One station was left out of the network and used as the rover; RTKLIB, an independent program, solved it against our virtual base and against the nearest real station. Horizontal and vertical are RMS errors of the fixed positions; the single-station rows used RTKLIB's broadcast ionosphere model. Results depend on station spacing and conditions.

Plans

Pick a plan, change it any time

Sign in to see the current plans and prices.

Create an account

Questions? Write to us: avcastertools@gmail.com